10 Call Box Station (Surface or Flush Mount)

2500-210 10 Call Box Base Station






Electrical Testing Labs (ETL) Listed

Sign up for RATH's Technical Certification Webinars
Click to Sign Up
2500-210D Views 2500-210D Top 2500-210D Back View 2500-210D Side Profile 2500-210D Top View 2500-210D Side View 2500-210D Front View
(Click for additional views)


2500-210D (Hard wired transformer - Surface Mount)
2500-210PSS (Hard wired transformer - Flush Mount)

  • Dimensions:
    2500-210D Stainless Steel Enclosure:
    • 12.56" H x 11.6" W x 1.68" D (With handset total 4.36" depth)
    2500-210PSS:
    • Stainless Steel Face Plate - 13.81" H x 13.81" W x 1.68" D (With handset total 2.67" depth)
    • Steel Back Box - 12.56" H x 11.6" W x 1.68" D
  • Use with up to 10 Call Boxes on the same telephone line
  • Designed for either 120vac or 24vdc power
  • 16.8V 1400mAH battery (part # RP7300109A)
  • Built-in battery backup recharges from 120vac or 24vdc power (allows for a minimum of 4 hours of talk time)
  • Requires a single analog (POTS, PBX, or central office phone line) or digital phone line. If used on a VoIP or cellular network, you must purchase a 2100-VOIP2CS or 2100-GSMLC4 Gateway Device
  • Audible alert sounds when Call Box places call to the Base Station
  • LEDs indicate which Call Boxes initiated a call
  • Rescue personnel pick up the Base Station handset and talk with Call Boxes and any existing emergency call
  • Includes Relay Contact that trips if any Call Box has been activated
  • Install the Base Station in a central location on the first floor (wall mount) or in an area approved by Authority Having Jurisdiction (AHJ)
  • See our Power and Communication Cable
  • Waterproof Enclosure available
  • IBC, NFPA, ADAAG Code compliant Also Elevator Code compliant
  • Conforms to UL Standard 2017 for Attendant Monitored Signaling Devices
  • Complies with Section 6.4 of UL 60950-1
  • ETL Listing Number: 5013373


Create an Area of Refuge Quote

Click Here To Download: