2100-956SSRC2 (Surface Mount)

Area of Refuge SmartRescue 1-10 Call Box System

2100-956SSRC2 Call Box with Cover (Surface Mount)

(Click for additional views)
Dimensions:
Face Plate: 10" H x 6-17/25" W
Back Box: 9-7/8" H x 6-1/2" W x 3" D
Cover: 9-3/4” H x 6-1/2” W x 1-1/4” D
Style: Stainless Steel Box

Code Compliance:

International Building Code (IBC)
National Fire Protection Association (NFPA)
Conforms to UL Standard 2017 for Attendant Monitored Signaling Devices
Complies with Section 6.4 of UL 60950-1

Power Requirements:

24vdc from part # 2500-PWR24U

Programming Features:

Programmable with up to 5 emergency numbers
Recordable location message (18 seconds)
On-site keypad programming or remote programming

Phone Capabilities:

Requires analog telephone line (POTS, PBX, or central office line)
Phone checks every 24 hours for an active phone line, if one is not detected, phone will provide a relay trip
Automatic answer feature with audible ring
Touch Tone operation only (Touch Tone is an AT&T registered trademark)

Additional Features:

Compatible with SmartRescue Base Station or Command Center for in-building rescue coordination
Built-in 10 phone consolidator feature allows you to install 10 Call Boxes and 1 Base Station on a single telephone line
Remote or on-site diagnostic test
Automatic dialer (31 digit programmable memory)
Built-in battery backup recharges from 24vdc power (allows for a minimum of 4 hours of talk time upon power loss)
7.2V 300mAH battery (part # RP7300110)

Optional Features:

Strobe interface and relay

Specifications:

Mounting: Surface Mount
Warranty: 2 years

Downloads: