2100-984LR (Surface Mount)

2100-984LR (Surface Mount)

Area of Refuge SmartRescue 1-10 Call Box System

2100-984LR (Surface Mount)Electrical Testing Labs (ETL) Listed
2100-984LR Dimensional Views Top Back Side Profile Top Rotation Side Rotation Front
(Click for additional views)
Dimensions: 9-7/8" H x 6-5/8" W x 3-1/4" D
Style: Red Fiberglass

Code Compliance:
  • International Building Code (IBC)
  • National Fire Protection Association (NFPA)
  • Americans Disabilities Act (ADA)
  • Conforms to UL Standard 2017 for Attendant Monitored Signaling Devices
  • Complies with Section 6.4 of UL 60950-1

Power Requirements:
  • 24vdc from part # 2500-PWR24U

Programming Features:
  • Programmable with up to 5 emergency numbers
  • Recordable location message (18 seconds)
  • On-site keypad programming or remote programming

Phone Capabilities:
  • Requires analog telephone line (POTS, PBX, or central office line)
  • Phone checks every 24 hours for an active phone line, if one is not detected, phone will provide a relay trip
  • Automatic answer feature with audible ring
  • Touch Tone operation only (Touch Tone is an AT&T registered trademark)

Additional Features:
  • Compatible with SmartRescue Base Station or Command Center for in-building rescue coordination
  • Built-in 10 phone consolidator feature allows you to install 10 Call Boxes and 1 Base Station on a single telephone line
  • Remote or on-site diagnostic test
  • Automatic dialer (31 digit programmable memory)
  • Built-in battery backup recharges from 24vdc power (allows for a minimum of 4 hours of talk time upon power loss)
  • 7.2V 300mAH battery (part # RP7300110)
  • NEMA 4 exterior rated

Optional Features:
  • Strobe interface and relay
  • Mushroom push button

  • Mounting: Surface Mount
  • Warranty: 2 years


2100-984LR (Surface Mount)