SmartRescue 10 (2500-210D) Surface Mount

Area of Refuge Two-Way Communication designed for 1 - 10 Call Boxes

(Click for additional views)
Dimensions: 12.56" H x 11.6" W x 1.68" D (4.36" D with Handset)
Style: Stainless Steel Box, Coil Cord

Code Compliance:

Power Requirements:

Requires a single analog (POTS, PBX, or central office phone line) or digital phone line. If used on an IP or cellular network, you must purchase an additional interface device from RATH®
Designed for either 120vac power or 24vdc power

Wiring Requirements:

Run twisted, shielded 4 wire set from each Call Box to SmartRescue and one standard phone line to the outside world

Phone Capabilities:

Additional Features:

Use with up to 10 Call Boxes on the same telephone line
Easy to use push buttons
Passively monitor communications between Call Boxes and the outside world via the LEDs: Solid lit LED indicates there is an emergency call in progress, slow blinking LED indicates there is a call on hold
Audible alert when Call Box initiates a call, silenced when call is joined from Base Station
Includes relay contact that trips if any Call Box has been activated
The SmartRescue is able to:
1. Call into all or individual Call Boxes as needed
2. Join existing conversations between Call Boxes and outside world
3. Hang up and original conversation will continue
4. Terminate outside world so it is only talking to the Call Boxes or terminate the call with all parties entirely
Built-in battery backup recharges from 120vac power (allows for a minimum of 4 hours talk time upon loss of power)
16.8V 1400mAH battery (part # RP7300109A)

Specifications:

Downloads: